VIRANIX Hungary Kft.

Hívás: +36 70 575 5500

Next-generation stone carpet surfaces

Old tiles? No need to rip them out.

VIRANIX stone carpet comes factory pre-mixed: just stir it thoroughly and you're ready to go. With the right preparation, it can also be applied over existing tiles – on floors and walls alike.

  • Kitchen
  • Bathroom
  • Stairs
  • Walls
  • Terrace
Order a color sample

Systems

Two systems, two jobs

The two stone carpet systems are completely independent: they differ in material, primer and application, so their components cannot be combined.

Factory pre-mixed · water-based

VIRANIX 1K stone carpet

Marble pebbles in a water-based binder, factory pre-mixed: simply stir thoroughly before application. For indoors and outdoors, on floors and walls.

Layer build-up

  1. 01TERRALOCK 1K primer
  2. 02VIRANIX stone carpet
  3. 03PRIMECOAT 2K topcoat
Floors
6 mm
Walls
2–4 mm
Pack size
25 kg

Not suitable for substrates with rising ground moisture.

Mixed on site · aliphatic PU

VIRANIX 2K PRO stone carpet

Marble aggregate and a two-component aliphatic polyurethane binder, mixed on site. An open-pored, water-permeable, UV-resistant finish for heavily used surfaces.

Layer build-up

  1. 012K PRO PU Primer
  2. 022K PRO Aggregate + PU Binder
Layer
min. 8 mm
Pot life
45–50 min
Surface
open-pored

Water-permeable finish: it does not replace waterproofing.

Process

Four steps to a finished surface

Both systems are built on a stable, properly prepared substrate, and each has its own dedicated primer. Components of the two systems cannot be combined.

1K system

  1. VIRANIX REPAIR 800 R4

    Repair

    Spalling, holes and dormant cracks must be repaired flush with the surface before the stone carpet goes on. Stone carpet is not used to fill hollows.

    REPAIR 800 R4
  2. VIRANIX TERRALOCK 1K - Primer

    Priming

    TERRALOCK 1K primer, rolled on in a thin, continuous coat at approx. 0.15 kg/m². The stone carpet goes on only once the primer has fully set.

    TERRALOCK 1K
  3. VIRANIX 1K Kőszőnyeg KSZ25 – közepes szemcse, 25 kg

    Stone carpet

    After thorough stirring, the factory pre-mixed stone carpet is spread and compacted: 6 mm thick on floors, 2–4 mm on walls.

    Stone carpet colors
  4. VIRANIX PRIMECOAT 2K - Water-Resistant Topcoat

    Sealing

    After full cure, two thin coats of PRIMECOAT 2K topcoat are applied, approx. 150 g/m² per coat.

    PRIMECOAT 2K

2K PRO system

  1. VIRANIX REPAIR 800 R4

    Repair

    Dusting, spalled or cracked substrates must be repaired first. The system may only be applied to a stable, load-bearing substrate.

    REPAIR 800 R4
  2. VIRANIX 2K PRO Stone Carpet PU Primer (for dry substrates)

    Priming

    2K PRO PU Primer on a dry, sound substrate. If ground moisture is suspected, use VAPOGRIP EP 2K instead of the PU primer. The 1K system's primer cannot be used in its place.

    2K PRO primers
  3. VIRANIX 2K PRO Stone Carpet PU Binder (2K)

    Mixing

    The marble aggregate and the two-component PU binder are mixed together on site. Pot life: 45–50 min.

    PU Binder
  4. VIRANIX 2K PRO Stone Carpet Natural Marble Aggregate

    Laying

    Laid at least 8 mm thick. The surface is open-pored and water-permeable, so it does not replace waterproofing.

    2K PRO Aggregate

Academy

VIRANIX Academy

Product knowledge, level by level – for beginners and professional installers alike. Learn which product does what, and how to build a layer system correctly.

  • Structured by level

    From the basics to installer-level expertise, at your own pace.

  • Lessons and quizzes

    Stone carpet systems, waterproofing, primers and floor coatings – in short lessons.

  • Certificate

    Sign in with your webshop account: your progress is saved to your account, and your name appears on the certificate.

Videos

See how it's done

Short clips from real projects: preparation, laying, sealing.

  • Kitchen makeover over old tilesPart 1
  • Kitchen makeover over old tilesPart 2
  • Mixing the topcoatPRIMECOAT 2K
  • Sealing with a rollerPRIMECOAT 2KGuide

Applications

Where can you use it?

Indoors and outdoors, on floors and walls. The layer build-up is always matched to the surface and the expected load.

  • Kitchen

    Even over old tiles, with the right preparation.

  • Bathroom & shower

    A seamless, joint-free surface with PRIMECOAT 2K topcoat.

  • Stairs

    Cladding for indoor and outdoor staircases.

  • Walls

    Applied 2–4 mm thick using fine-grain material.

  • Terrace & balcony

    A fresh finish for outdoor surfaces.

  • Pool surrounds

    2K PRO: an open-pored, water-permeable finish.

Products

Featured products

FAQ

Frequently asked questions

Can't find your answer? Call us at +36 70 575 5500 or write to info@viranix.hu.

Which VIRANIX stone carpet systems can I choose from?

There are two independent systems. VIRANIX 1K stone carpet is factory pre-mixed and water-based: simply stir it thoroughly before application. Its layer build-up is TERRALOCK 1K primer, stone carpet and PRIMECOAT 2K topcoat.

VIRANIX 2K PRO consists of marble aggregate and a two-component aliphatic polyurethane binder, which are mixed on site. It is laid at least 8 mm thick on its own 2K PRO PU Primer. Components of the two systems cannot be combined.

Can it be applied over old tiles?

Yes, 1K stone carpet can go over old tiles with the right preparation, provided the tiling is sound: not hollow-sounding, not loose and not damp. Smooth, glazed tiles must be degreased and matted, then a quartz-sand BETOGRIP bonding bridge is applied, followed by TERRALOCK 1K primer.

Can it be applied to walls?

Yes, 1K stone carpet also holds on vertical surfaces. On walls, it is applied 2–4 mm thick using fine-grain material.

Do I need a topcoat?

Yes. The 1K system always receives a PRIMECOAT 2K topcoat – without it, the surface would remain open-pored and dirt would settle into it more easily. This is especially important in bathrooms and showers.

How much material do I need?

For 1K stone carpet on floors at 6 mm, one 25 kg bucket covers approx. 2 m²; on walls at 2–4 mm, approx. 3–4 m². For 2K PRO at an 8 mm layer, you need approx. 10 kg of aggregate and 0.6 kg of binder per m². For surfaces with many edges and corners, allow approx. 10% extra. Work out the exact quantity with our calculator.

What substrates is it suitable for?

The substrate must be stable, load-bearing, clean, dry, and free of dust and grease. Moving, cracked or dusting surfaces must be repaired first. 1K stone carpet must not be applied to substrates with rising ground moisture.

Is 2K PRO waterproof?

No. 2K PRO is an open-pored, water-permeable finish: it lets water through and does not form a closed layer, so it does not replace waterproofing.

How do I clean it?

The seamless, continuous surface is easy to keep clean: sweeping, vacuuming and mopping with lukewarm water are all it takes. Outdoors, it can be cleaned with a garden hose or by gentle brushing. Avoid strong acidic or alkaline cleaners and abrasive scouring tools.