1K stone carpet installation guide
Everything you need to lay VIRANIX 1K stone carpet, in one printable PDF: working conditions and tools, material requirements with worked examples, substrate preparation, priming, spreading and compacting, two coats of topcoat – with photos of good and bad results, a list of common mistakes and a checklist. The guide is currently available in Hungarian.
Installation guide · PDF
VIRANIX 1K stone carpet system
- PrimerTERRALOCK 1Kapprox. 0.15 kg/m²
- Surface1K stone carpet2–8 mm
- TopcoatPRIMECOAT 2K2 coats
What's in the guide?
- Before you startconditions, tools, workflowp. 3
- How much material?layer thickness, coverage, calculationp. 4
- Worked examplesbalcony, garage, kitchen over old tiles, plinthp. 5
- Step 1 · Substrate preparationconcrete, tiles, walls; water and waterproofingp. 6
- Step 2 · Edge profiles and primingprofiles, TERRALOCK 1K, on tilesp. 7
- Step 3 · Spreading and compactingsmall heaps, wet edge, layer thicknessp. 8
- Good and bad examplesphotos, cross-sections, two layersp. 9
- Drying and scheduletimes, sample schedule for a 12 m² balconyp. 10
- Step 4 · Topcoat: PRIMECOAT 2Kmixing 20 : 1, applicationp. 11
- Mistakes and their consequenceswhat happens and how to prevent itp. 12
- Checklist and work logprint it and tick it offp. 13
- Use, care, safetycleaning, storage, frequently asked questionsp. 14
The key figures
How much material do you need?
| Surface | Layer | 1 bucket (25 kg) |
|---|---|---|
| Wall, plinthfine grain | 2–4 mm | approx. 4 m² |
| Pedestrian surfaceterrace, balcony, stairs, indoor floor | 4–6 mm | approx. 2 m² |
| Vehicle surfacegarage, medium grain only | 8 mm | approx. 1.5 m² |
Guide values without allowance. Primer: TERRALOCK 1K approx. 0.15 kg/m². Topcoat: PRIMECOAT 2K in two coats approx. 0.30 kg/m² (PRIMECOAT 2K PRO on vehicle surfaces). Always round the number of buckets up. For an exact material list, use the calculator.
Important
- Not suitable for wood, parquet, laminate, OSB or substrates with rising ground moisture.
- Neither the stone carpet nor the topcoat is a waterproofing: on balconies and on terraces above rooms, it may only be laid on intact, working waterproofing.
- On old tiles only if they are stable, not hollow and dry: degrease, sand the glaze matt, apply BETOGRIP, then TERRALOCK 1K.
- The PRIMECOAT 2K topcoat is required indoors too, in two coats – and only on fully dried stone carpet.
- Do not work in strong direct sun, and protect the fresh surface from rain and strong sun until the topcoat is on. Outdoors, work is not possible below +10 °C.
System components
- 1K stone carpet – fine grain (KSZ01–KSZ16)
- 1K stone carpet – medium grain (KSZ17–KSZ25)
- TERRALOCK 1K primer
- PRIMECOAT 2K topcoat
- BETOGRIP bonding bridge – for old tiles
- Edge and closing profiles
- Material calculator
- Video lessons – VIRANIX Academy
Any questions?
Call us on +36 70 575 5500 (Monday to Friday, 10:00–16:00), email info@viranix.hu, or visit our showroom: Némedi út 65, 2330 Dunaharaszti, Hungary.
Times and quantities in the guide are guide values (20 °C). Assessing the conditions on site – substrate, moisture, weather – is the installer's responsibility.

