Hívás: +36 70 575 5500

Felhasználás

Where to use it

On crack-prone surfaces and at connections it reinforces the waterproofing layer, so it is less prone to cracking and keeps an even thickness at details too.

  • Horizontal and vertical surfaces

    Reinforcing crack-prone surfaces.

  • Terrace, balcony, parapet

    Including terrace-to-roof connections.

  • Wall–floor connections

    At the critical points of the waterproofing.

  • Cracks

    Bridging cracks in the waterproofing.

  • Wet rooms

    Waterproofing bathrooms and showers.

  • Roof connections

    Gutter, chimney and skylight connections.

Kivitelezés

Installation step by step

ARMURNET goes between two layers of liquid waterproofing: you embed it in the first, still fresh layer, and the second layer covers it completely.

  1. Prepare the substrate

    The surface must be sound, dry, load-bearing, free of dust and grease, and level, with no oil, rust or paraffin residue or loose parts. Fresh concrete should be 3–6 weeks old, depending on conditions.

  2. Apply the first coat

    Apply the first coat of liquid waterproofing.

  3. Embed the fabric

    While the coat is still fresh, lay ARMURNET into it and smooth it in so that it is fully saturated, without creases.

    Tipp Make joints with an overlap.

  4. Apply the second coat

    Once the first coat has set, apply the second coat, covering the fabric completely.

    Figyelem ARMURNET always works embedded between layers of liquid waterproofing; on its own it is not a complete waterproofing.

Adatlap

Technical data

Type
Non-woven, flexible reinforcement fabric
Color
White
Weight
approx. 45 g/m²
Width
10 cm and 75 cm
Roll length
100 m
Material consumption
1 m²/m², or 1 m / 1 linear meter of connection
Installation
By hand, embedded in the fresh waterproofing layer
Storage
12 months, unopened, in a dry place, +5 °C – +25 °C

Safety information

The product is not classified as hazardous. Wearing work clothing and protective gloves is recommended.

GYIK

Frequently asked questions

Can't find the answer? Call us at +36 70 575 5500 or write to info@viranix.hu.

What is it for?

For reinforcing liquid waterproofing layers on crack-prone surfaces, at wall–floor connections and at details, so that the layer is less prone to cracking and keeps an even thickness everywhere.

Does it waterproof on its own?

No. ARMURNET always works embedded between layers of liquid waterproofing; on its own it is not a complete waterproofing.

How much do I need?

1 m²/m² on surfaces, 1 m / 1 linear meter at connections. Sold by the square meter.

How is it installed?

Lay it into the first, still fresh waterproofing coat and smooth it in without creases, making joints with an overlap. Once the first coat has set, the second coat should cover it completely.

Does it stay flexible in the cold?

Yes, it retains its flexibility even at low temperatures.

Which waterproofing can it be used with?

With liquid waterproofing products, for example the acrylic waterproofing AQUASHIELD ACRYL UV-1K, embedded in its first, still wet coat.

Rendszer

You may also need