MAGNETIX Magnet-Receptive Textured Skim Coat

Nanotechnology-based smart skim coat with a very high iron content that turns suitable wall surfaces into an invisible, magnet-receptive display surface.

MAGNETIX magnet-receptive plaster is an innovative interior design solution based on nanotechnology. Thanks to a special manufacturing process, the metal micro-particles in the plaster are distributed evenly and at a high density. The result is a premium-quality, smooth, attractive surface that can be painted in any color and, according to manufacturer tests, can provide up to 10 times stronger hold than conventional magnetic paints.

Why choose MAGNETIX nanotechnology plaster?

• Innovative micro-particle structure: Nanotechnology provides strong magnetic attraction while keeping the wall surface smooth and even.
• Invisible and attractive: Once dry, it can be painted in any color (with latex paint) or coated with chalkboard or smart paint – with only minimal loss of attraction at normal paint film thicknesses.
• High load capacity: With neodymium magnets it can securely hold items weighing up to 2 kg (picture frames, small shelves), provided the layer thickness is sufficient.
• No drilling, no mess: No more nails, drills or wall-damaging adhesives – spare your walls later repairs.
• Creative freedom: Ideal for children's rooms, kitchens, offices and meeting rooms as a modern, interactive presentation surface.

Coverage and Material Requirement

Applying the correct amount of material is essential to achieve adequate holding force:

*Data refer to the recommended thickness and application. On uneven substrates, consumption may increase significantly.

Application Guide and Layer Build-up

1. Preparation and Priming (Mandatory):
   Always treat the dust-free wall surface with a deep-penetrating primer. Mask off the area with masking tape (e.g. TESA sensitive).
2. Mixing and applying the 1st coat:
   Open the container. If the material is not the consistency of sour cream, add a small amount (1–3 dl) of hot water and stir thoroughly. Using a steel trowel, apply half of the plaster (approx. 0.5 kg per m²) as thinly as possible. Carefully remove the tape.
3. Applying the 2nd coat:
   After 15–20 minutes (when the first coat is still semi-damp), tape around the area again and apply the second coat. Smooth it completely with the steel trowel, then remove the tape again.

Technical Data

• Packaging: 1, 2, 5, 10, 15 kg / bucket
• Drying time: 16 hours (before painting)
• Finishing: Can be painted as desired once dry.